![]() |
Formula Guru's
Reposting here since I didn't get any answers in General Q & A, does anyone know what these cans are that are welded to my tails on 1990 357 SR1 420/TRS? First time I have seen them so I am curious.
https://cimg1.ibsrv.net/gimg/www.off...0b84f552f.jpeg |
Mufflers or baffles maybe. Any lines going to them?
|
Originally Posted by Smoke eater
(Post 4744564)
Mufflers or baffles maybe. Any lines going to them?
|
My guess would be some type of muffler, since the flapper is usually in the tail piece. What else would you do to an exhaust?
|
I vote for muffler, or a flux capacitor
|
I always install the flux capacitor on the shifter. easy to get to.
|
Originally Posted by SabrToothSqrl
(Post 4744631)
My guess would be some type of muffler, since the flapper is usually in the tail piece. What else would you do to an exhaust?
|
Originally Posted by SabrToothSqrl
(Post 4744655)
I always install the flux capacitor on the shifter. easy to get to.
|
On a side note, I opened up the silent thunder platform as I have all previous birds and this boat much quieter than ones in the past. I am going to have a closer look when I put the tails to put in new gaskets and plates - might end up cutting the off to let her exhale a little better.
|
Originally Posted by distantthunder
(Post 4744714)
On a side note, I opened up the silent thunder platform as I have all previous birds and this boat much quieter than ones in the past. I am going to have a closer look when I put the tails to put in new gaskets and plates - might end up cutting the off to let her exhale a little better.
|
Looks like my reply from yesterday didn’t make it.
I'm guessing mufflers based on how the boat sounds in the videos. I wouldn’t cut them off. I’m sure Mike Mello or Gordon Demarco have the other tailpipes. Maybe you could set up a trade? Hardin makes news ones that should bolt on. |
They are mufflers had them on my 402 when i bought it. Has baffles in the center exhaust flows around the outside.
|
They can be cut.off if your careful. Cut. The muffler just past the weld but don't cut thru the tail. And it will slide off.
|
What did you end up doing about this!?! The wife might not be happy with how loud everything now is with the new setup. Had it in the water for the first time today. I told the wife the reason it has to be that loud is so I don’t hear her saying slow down. I got the look haha. Deep down inside I know she enjoys it tho.
|
Originally Posted by Smoke eater
(Post 4749384)
What did you end up doing about this!?! The wife might not be happy with how loud everything now is with the new setup. Had it in the water for the first time today. I told the wife the reason it has to be that loud is so I don’t hear her saying slow down. I got the look haha. Deep down inside I know she enjoys it tho.
I haven't fooled with it yet. I was trying to get through this season without modifying anything but it's becoming harder to stick to that thought. I have been wanting to at least pull my ST off so it would give me motivation to cut the mufflers off. I was watching videos of my previous Formula's and I miss the noise! |
Originally Posted by distantthunder
(Post 4749389)
That's hilarious, text or send some videos of your beast running!
I haven't fooled with it yet. I was trying to get through this season without modifying anything but it's becoming harder to stick to that thought. I have been wanting to at least pull my ST off so it would give me motivation to cut the mufflers off. I was watching videos of my previous Formula's and I miss the noise! |
| All times are GMT -5. The time now is 07:53 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.