I need a new aluminum dash panal/port side and 2 drink holders/steps on either side of my rear bench seat. Should I try Formula directly or can a dealer help me? Who here is the dealer that everyone raves about?

It's for my 1994 303SR1

Thanks for your help.

Toolman (Dave)

ROBERT AT NELEMS MARINE IN JASPER AL.205-221-3870 ALSO KNOW AS MAGIC FLOAT IN OSO. MAYBE HE CAN HELP OR CALL FORMULA AT 260-724-9111 GOOD LUCK

Formula can usually help with info for what you need , but will not sell to you direct...must go through a dealer
I had my interior done a few years ago , they took my HIN# and told me what I needed. They also insisted an upholstery shop order it. Sooooooo Smitty's in Westville got , and did it for me

running? Have you put any hours on the new motors yet?

Thanks for the info about Formula parts. I'll make sure I give them my HIn#.

We going down to the C&D canal next saturday around 10am. If you're out that day, let me know. Cruise down there together maybe? Gotta check out canal day, looks CRAZY!

See ya!

Toolman

Toolman,
Only have about 4 hours on engines and half of that's on the hose. Still have idle problems.
It will sit there all day and idle at 800 rpms , put in gear and it will stall. Get it in gear and set the idle for 800...ok fine ...no problem. But put it in neutral and it goes to 1300/1500 rpm

Certainly can't put in gear at that speed. That combined with the weather and inability to work on it , I'm about ready to shrink wrap it for another year
Maybe I can get something straightened out this week

Robert is gone today(Monday). I will tell him about your messagewhen he gets back. Karen