First time out!!! a few???'s
#21
Gold Member
Gold Member
bowtie,
I see you put a bid in on the prop. Unfortunately the reserve price hasn't been met yet. Wonder how high it has to before it does? Good luck.
Some thing I learned from looking at E-Bay props, even number pitches are usually for outboards. Another way to spot and OB prop is usually there isn't a machined step at the base (case) end. If you enter the P/N on the Merc parts site it won't say if it fits OB or sterndrive.
I see you put a bid in on the prop. Unfortunately the reserve price hasn't been met yet. Wonder how high it has to before it does? Good luck.
Some thing I learned from looking at E-Bay props, even number pitches are usually for outboards. Another way to spot and OB prop is usually there isn't a machined step at the base (case) end. If you enter the P/N on the Merc parts site it won't say if it fits OB or sterndrive.
#22
Guest
Posts: n/a
I didn't know there was a difference what do you think that one is?? I had the boat out again tonight it was so smooth the boat flew it was sluggish on the start but when it got on plane it flew even with the 25 ptch it still saw 4800 rpms the speedo read 0 though so that is what I am going to look into repacing first!! I also fixed the drive problem that goes up and down now. The only problem is the guage that shows postition does not work!!! over all I am loving this boat formula rock!!!!!!
#23
Gold Member
Gold Member
If you're taking about the one you bid on, it will fit the Alphia outdrive. No problem.
I was looking at a prop with a low opening bid and vrey little information but when I ran the P/N through Mercs site it showed the prop as being a left hand rotation. Yours and mine need right hand.
I was looking at a prop with a low opening bid and vrey little information but when I ran the P/N through Mercs site it showed the prop as being a left hand rotation. Yours and mine need right hand.
Thread
Thread Starter
Forum
Replies
Last Post
TeamRelentless
General Racing Discussion
2
03-08-2004 03:41 PM