![]() |
Originally Posted by mikemracing
(Post 2894767)
Hi new to boating and just bought a 90 242ls with an aluminum headed punched out 454 now a 496. Boat runs great and I've seen 75mph on the gps. It also has bravo x with an imco lower unit. My question is does anyone have a wiring diagram for this year and model they could email me. The previous owner started replacing the original gauges with white faced ones, he installed a gps speedo and tach and I now have finished the rest of them. My problem is it seems the gauges I installed only work half the time, I'm guessing a loose ground but I don't know where to look. Any help would be greatly appreciated.
|
87 242 sr -1
New to the forum but very helpfull, this boat i am looking at has twin 350-260hp. Compared to single boat how is the ride different?with the extra wieght.
thanks |
Fastpapa r u looking at the one in the DC area?
|
87 242 sr
No i am looking at one in bc canada side
|
Originally Posted by fastpapa
(Post 2907037)
New to the forum but very helpfull, this boat i am looking at has twin 350-260hp. Compared to single boat how is the ride different?with the extra wieght.
thanks |
f242 sr-1
Thanks for info, speed wise low 60s in freshwater?
|
Boat will run mid 60's.: 65-67 range. Factory rating was 65 MPH. They'll run this fast with light load, and it needs chop. If it's too flat, it can't get enough air under it to loosen it up. It's a heavy boat, so need to get it to dance to get the top end.
|
f242 sr -1
Speed is not to bad then, so it sounds like the boat does handle the rough ok. Do you think i would be better to wait for a 29ft as the price on this 242 sr 1 twin is 20,000 cdn. I am in Bc.
Thanks again for the reply |
depends on what you like
|
I have a SR1 and like it. Have not really pushed it that much due to working on it.
|
| All times are GMT -5. The time now is 12:19 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.