1988 F311SR1 For Sale
12-04-2003 | 07:32 PM
#12
Thread Starter
Platinum Member
Joined: Oct 2003
Posts: 280
Likes: 5
From: Mentor Ohio
ontheh20,
The engines are a proven combination of merlin oval port heads, hydraulic roller cams, RPM Air gap intakes, Holley carbs, gill offshore wet exhaust, forged 9.25:1 pistons with 150 hrs on them. The boat has mufflers that are switchable. Mentor is along the shore of lake Erie approximately 20 miles east of Cleveland.
The engines are a proven combination of merlin oval port heads, hydraulic roller cams, RPM Air gap intakes, Holley carbs, gill offshore wet exhaust, forged 9.25:1 pistons with 150 hrs on them. The boat has mufflers that are switchable. Mentor is along the shore of lake Erie approximately 20 miles east of Cleveland.
12-04-2003 | 07:44 PM
#13
Thread Starter
Platinum Member
Joined: Oct 2003
Posts: 280
Likes: 5
From: Mentor Ohio
Formula Outlaw,
I couldn't agree more, the 311 is a very big 31 ft boat in todays standards, the 312 is more like the size of the old 272. I'm currently in the process of buying a 382 FasTech and have taken several measurements and the running surface is at the most 5 ft longer than the 311.
I couldn't agree more, the 311 is a very big 31 ft boat in todays standards, the 312 is more like the size of the old 272. I'm currently in the process of buying a 382 FasTech and have taken several measurements and the running surface is at the most 5 ft longer than the 311.
