How to Install a kill switch/lanyard?
01-16-2006 | 10:32 AM
#12
Were doomed!
Joined: Oct 2000
Posts: 7,097
Likes: 1,395
From: Chicago, IL
Re: How to Install a kill switch/lanyard?
Originally Posted by mopower
Ground wire to the ignitions switch 
You have a 12v into the switch( red I believe) and one coming out to power the gauges and ignition(purple). The other one goes to the starter solenoid.
You want it in the purple coming off the switch , going to the engine(ignition)
You have a 12v into the switch( red I believe) and one coming out to power the gauges and ignition(purple). The other one goes to the starter solenoid.
You want it in the purple coming off the switch , going to the engine(ignition)
unless he has some fancy lighted switch? 
mopower has it right....and the starter wire will probably be yellow.....may even have a tracer on it sometimes...
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
Thread
Thread Starter
Forum
Replies
Last Post
Sydwayz
General Boating Discussion
68
05-11-2006 07:37 PM
