4 - Blades on Older Formulas
03-04-2005 | 04:05 PM
#31
Registered
Joined: May 2003
Posts: 11,772
Likes: 0
From: In the Mountains
Re: 4 - Blades on Older Formulas
Originally Posted by CMG
Thanks for the "condensed" version 
before I call Hydromotive with my dumb q's, did you replace with 23p?
Anyone have a used set??? This isn't starting out to be a year with a lot of discretionary funds.
Silent Thunder - when mine inevitably goes to crap and the inside starts to flap and vibrate I'll trash mine too. at the least its less to trip on.
Tanx
before I call Hydromotive with my dumb q's, did you replace with 23p?
Anyone have a used set??? This isn't starting out to be a year with a lot of discretionary funds.
Silent Thunder - when mine inevitably goes to crap and the inside starts to flap and vibrate I'll trash mine too. at the least its less to trip on.
Tanx
No, I "upped" an inch and went with 24's. I know that the usual rule of thumb when going from a 3 blade to a 4 blade is to downsize an inch or two in pitch, but the Hydromotive guys said that I would be creating enough "less" drag that they thought I could go the 24's. They were right.....
03-10-2005 | 05:54 PM
#33
Thread Starter
Registered
Joined: Nov 2000
Posts: 1,548
Likes: 5
From: Denham Springs, La.
Re: 4 - Blades on Older Formulas
Thanks OPIE, I think I have somone here that has some 25 Mirages and actually needs my 23's. We are scheduled to swap wheels and make some passes this weekend. If we are both satisfied, we plan to trade. If it falls through I'll send you a PM.
