Stern Light ?
#1
Looking for a bulb for my Stern Lamp .... I called Formula and they said they did not install them ...It is flush with the Deck and when you turn it on it raises up about 6' ..It sez "power Light" on the lens but I cant find any info on it ....
89 311
89 311
#5
Registered
Joined: Aug 2002
Posts: 2,896
Likes: 3
From: Eastern Lake Ontario
The OEM light mounts on the windshield frame. That's so you get a wicked glare in your eyes, it reflects off the deck and you can't put your top up with the light in place.
One of Formula's more idiotic designs. I remounted mine at the back like your aftermarket light is.
Agree with above, auto parts places will have bulbs to fit.
One of Formula's more idiotic designs. I remounted mine at the back like your aftermarket light is.
Agree with above, auto parts places will have bulbs to fit.
#6
Formula puts the light there because of Coast Guard Regs. I moved mine to the back and have been told by the coast guard that it is not technically correct but they understand why I did it and are ok with it.....
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#7
Well ... not the whole story ....
I was removing the bulb ......and ...well ..... ok damnit ..I dropped it ...in the water ...and it sank ..... so all I have is a lite with no bulb....went to west marine and they had no clue .... the socket for the bulb is rectangular .. about 3/4x1/4 ...will keep looking ....
I was removing the bulb ......and ...well ..... ok damnit ..I dropped it ...in the water ...and it sank ..... so all I have is a lite with no bulb....went to west marine and they had no clue .... the socket for the bulb is rectangular .. about 3/4x1/4 ...will keep looking ....
#8
Last edited by offthefront; 04-02-2005 at 09:32 AM.
#10
Registered
Joined: Aug 2002
Posts: 2,896
Likes: 3
From: Eastern Lake Ontario
Originally Posted by offthefront
Well ... not the whole story ....
I was removing the bulb ......and ...well ..... ok damnit ..I dropped it ...in the water ...and it sank ..... so all I have is a lite with no bulb....went to west marine and they had no clue .... the socket for the bulb is rectangular .. about 3/4x1/4 ...will keep looking .... 
I was removing the bulb ......and ...well ..... ok damnit ..I dropped it ...in the water ...and it sank ..... so all I have is a lite with no bulb....went to west marine and they had no clue .... the socket for the bulb is rectangular .. about 3/4x1/4 ...will keep looking .... 
Ohhhhhhhhhhhhhhh, so the truth comes out.
We would have been none the wiser had you just said you misplaced the bulb



