![]() |
Fountain swim ladder
3 Attachment(s)
Here is the new fold up swim ladder I just installed on my 27 Fever. It took all of about an hour to install, it uses the toggle bolt type hardware. Sells for $285.00 + Tax and shipping about 2 weeks. Here is the website [email protected] My wife love this step. Hint Christmas is right around the corner :evilb:
I'll need to take some more pics on a lower resolution I can't shrink them down enough |
Re: Fountain swim ladder
1 Attachment(s)
Here is another shot
|
Re: Fountain swim ladder
Bought the same ladder this spring only in the white powdercoat,wrong choice, it tends to catch exhaust soot. I was worried about the anchors they supplied but they said up to 300 LB. :eek: ..good thing I lost some weight :drink:
|
Re: Fountain swim ladder
Amen to the 300lbs I had a rather large woman 300+ climb up it and it never fell off I figure she put the test on it
|
ladder
35 White Lightning, thanks for the pictures, that does look pretty clean on there. So, you did use the the hardware they sent with the ladder. Elba told me that the backing nuts are steel verses the outside ones being stainless. Did you coat the steel part with anything before you shoved them through the holes? Thanks also for the tip on the white powered coated one because I was going to go with it until you mentioned the soot..... If you have any pictures on the trailer from the back I'd like to see them.. Thanks again Speed
|
Originally Posted by 35 White Lightning
(Post 1502965)
Amen to the 300lbs I had a rather large woman 300+ climb up it and it never fell off I figure she put the test on it
roflol |
I bought the same ladder for my 42. Works great, holds my fat azz with no problems. Only problem I have had is the insert anchors are not SS and 1 of them has some rust. I use the boat in salt water. I don't think it will be an issue, but I am keeping my eye on it.
|
I have a 32' Fountain and am looking for a solution. I'm thinking i would want more steps than these spring steps. I noticed on the aqua performance website, they have a new telescoping ladder but i dont have any idea how i will get back in the area where the anchors need to be mounted on this Fountain??? there is a firewall back behind the motors blocking that area. How did you Fountain guys make this work?
|
My swim ladder is made into the swim platform. I bought the same ladder Fountain sells at half the price straight from the manufacturer. ggschmitt.com
|
Originally Posted by rw40426
(Post 3399005)
My swim ladder is made into the swim platform. I bought the same ladder Fountain sells at half the price straight from the manufacturer. ggschmitt.com
|
| All times are GMT -5. The time now is 03:47 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.