Got Ilmors - Look at what's going to Power my 38
#31
Registered
Re: Got Ilmors - Look at what's going to Power my 38
Marginmn,
Hey Robert ever take a look at a piece of Swiss Cheese? Look like anything familiar?
BTW like to go 38 maybe 42 , stagered set up , 575 SCi's , miss that blower whine. Fishing now. Would need to be an equal to what I have now and you know what that is !
b
Hey Robert ever take a look at a piece of Swiss Cheese? Look like anything familiar?
BTW like to go 38 maybe 42 , stagered set up , 575 SCi's , miss that blower whine. Fishing now. Would need to be an equal to what I have now and you know what that is !
b
#33
Re: Got Ilmors - Look at what's going to Power my 38
When Fountain started mounting the tabs horizontally, didn't they start notching the sides to allow the tabs to be mounted farther outboard? How much was your drive cutout changed?
And I have to ask why the rubrail has been removed. Did you originally have the stainless insert. If not, did you have to replace the complete rubrail or just the white insert to go to the stainless.
And I have to ask why the rubrail has been removed. Did you originally have the stainless insert. If not, did you have to replace the complete rubrail or just the white insert to go to the stainless.
#34
Re: Got Ilmors - Look at what's going to Power my 38
As far as the tabs are concerned, they are working with Fountain on where to position them.
The drive was moved up about an inch.
The complete rubrail was changed last year and at that time I choose the chrome insert over the white. They removed that section in the picture in order to fix a spider that was forming.
The drive was moved up about an inch.
The complete rubrail was changed last year and at that time I choose the chrome insert over the white. They removed that section in the picture in order to fix a spider that was forming.
#35
Registered
Re: Got Ilmors - Look at what's going to Power my 38
Originally Posted by Marginmn
The dyno sheets say these are about 100 hp per side stronger than my 525's, and they about 300 lbs per side lighter than my 525's. So with a 200 hp-ish increase and a 600 lbs in weight savings, I'm hoping for 5 to 7 mph - after I play with props. My current 32's are non-labbed. Midrange is suppose to be killer on these Vipers
#36
Re: Got Ilmors - Look at what's going to Power my 38
Originally Posted by Marginmn
Jim Dykes up in Cleveland. Their shop was filled with race boats so I think these guys really know how to rig a boat for top speed.
Rob
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#37
Registered
Re: Got Ilmors - Look at what's going to Power my 38
Originally Posted by Marginmn
Hey Peter,
You could be looking quite a while. Btw, did you notice the name on the back of my boat? It's suppose to say "Anniversary Edition." That too is going to be corrected soon
You could be looking quite a while. Btw, did you notice the name on the back of my boat? It's suppose to say "Anniversary Edition." That too is going to be corrected soon
BTW how bout a '02 38 Beak Boat , Short stagered 575 SCi's , XR's , and little over 60 hrs. , Not new , but shows as well as any '05 out there. [ to paraphrase a comment I heard some where ] [ wonder where I heard that ]
#38
Re: Got Ilmors - Look at what's going to Power my 38
The boat is documented under the name Anniversary Edition. When I sent it to the painters I gave them a pic of the 35 and said, "Because it's documented under the name "Anniversary Edition" it needs to say "Anniversay Edition", Port of Albany, KY, but do it in the same style as it this photo of the 35.
I got back "20'th" They made up a new decal with the correct name on it and the riggers are goin g to put it on.
I got back "20'th" They made up a new decal with the correct name on it and the riggers are goin g to put it on.