project 27
02-23-2006, 02:43 PM
#1
Registered
Thread Starter
Join Date: Dec 2005
Location: ROUND LAKE IL
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
project 27
many of you have seen the cheap fountain thread
http://www.offshoreonly.com/forums/s...=116626&page=1
this is the ongoing project to restore it to is original beauty.
i figure it will take another 2 months to complete this will be the play by play and i will include dollar amounts!
here are some pics from today
http://www.offshoreonly.com/forums/s...=116626&page=1
this is the ongoing project to restore it to is original beauty.
i figure it will take another 2 months to complete this will be the play by play and i will include dollar amounts!
here are some pics from today
02-23-2006, 02:50 PM
#3
Registered
Thread Starter
Join Date: Dec 2005
Location: ROUND LAKE IL
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Re: project 27
all interior, dash and gauges, rub rail, cables, throttles, cover, engines serviced, props, stereo, and new lower drive covers are going to be replaced. 
plus a superior detail 
plus a superior detail
02-24-2006, 07:21 AM
#4
Registered User
Join Date: Feb 2001
Location: Tampa, Indian Shores Beach
Posts: 3,300
Likes: 0
Received 1 Like
on
1 Post
Re: project 27
While you have everything out I would repaint it to some newer graphics, also I hope you got a great deal, because your going to put some worki into her, keep us informed 
WILL
WILL
02-24-2006, 09:04 PM
#5
Charter Member
Re: project 27
So, were the bolts that hold all the interior side panels, grab handles and seats 3" longer than needed? 1st thing I did was get in the side compartments with my SawZall and cut those gubbers down. Everything I shoved in the side compartments were getting snagged on those bolts. 
I see your helm has a 'tub' under the dash. When did Fountain go to the molded in design?
Keep the pictures coming!
I see your helm has a 'tub' under the dash. When did Fountain go to the molded in design?
Keep the pictures coming!
02-25-2006, 07:12 PM
#8
Registered
Thread Starter
Join Date: Dec 2005
Location: ROUND LAKE IL
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Re: project 27
the studs were way to long......but most of the interior peeled off (rotten wood). as you can see the rear deck still has the screws in it. the dash is the next to go..i have all the gauges, throttles, gps and panel. red panel, chrome Bessel's, red gauge rim, and chrome billet throttles w/red knobs.
those throttles are so cool!
those throttles are so cool!
02-25-2006, 11:06 PM
#9
Re: project 27
I have the 1st section (head rest section) of my hatch off now. It was very disappointing to see they drilled the hatch all the way thru larger than the washer size, then place a single strip of FG over the hole on top, and drill it the screw size for the sections to fasten to. A couple of mine where almost pulled thru the FG strip. Very poor thinking in my opinion. Guess that's something else I have to fix properly. 
02-27-2006, 08:28 AM
#10
Registered
Join Date: Apr 2005
Posts: 725
Likes: 0
Received 0 Likes
on
0 Posts
Re: project 27
I am replacing the wood on most of the upholstery on my 27. a lot of the hardware just pulled through when i took it off. I'm just going to use some short stainless lag bolts to reattach it.
