|
Re: Anchor Storage...?
buy a bigger boat or always raft off of someone else :D
problem solved :evilb: sorry had to be an a$$ |
Re: Anchor Storage...?
I bought my Fountain used and it has a bracket that is mounted in the engine compartment. I will try to get a pic for you tomorrow.
|
Re: Anchor Storage...?
1 Attachment(s)
Here's the pic.
|
Re: Anchor Storage...?
I cut about 1.5" off each end of my anchor, just enough so it will fit under the seat.......I know the extra length of that top bar helps stabilize the anchor so it will set properly but it works fine and I anchor quite a bit...........doug
|
Re: Anchor Storage...?
2 Attachment(s)
Here are my pics.
|
Re: Anchor Storage...?
Originally Posted by pullmytrigger
I cut about 1.5" off each end of my anchor, just enough so it will fit under the seat.......I know the extra length of that top bar helps stabilize the anchor so it will set properly but it works fine and I anchor quite a bit...........doug
I did the same thing, cut off the rods flush with the flukes to fit in the rear seat.. I never understood what good the extra 3" or so per side the rod did. Never been a problem so far. |
| All times are GMT -5. The time now is 07:38 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.