Anchor Storage...?
#6
Thread Starter
Registered
Joined: Aug 2005
Posts: 247
Likes: 0
From: ROCHESTER, NY
does anyone make a bracket or anything that could be mounted in the engine compartment...? If I put it under the rear seat I will have no where for the life jackets.....
#7
My previous boat had a laundry basket (I think) held in place with a couple of peices of rope next to the motor. I used it for the bumpers mainly, but will work for anything.
Any type of basket would do the trick
West Marine carries straps that clamp over the bow railing of cruisers to hold anchors. Those will work too. May take a bit of modifying to screw them to your bulkhead. Just a thought.
For that matter. just a couple of hooks from your local hardware store to hold the anchor upside down by the bar. If you have a fluke type anchor.
Any type of basket would do the trick
West Marine carries straps that clamp over the bow railing of cruisers to hold anchors. Those will work too. May take a bit of modifying to screw them to your bulkhead. Just a thought.
For that matter. just a couple of hooks from your local hardware store to hold the anchor upside down by the bar. If you have a fluke type anchor.
Last edited by US1 Fountain; 12-02-2011 at 11:14 AM.
#9
I would put mine in a nylon bag with the chain and rope and put it in the engine compartmet secured down so it would not move. I'll look for a pic.
__________________
"All I need are some tasty waves, a cool buzz and I'm fine"
"All I need are some tasty waves, a cool buzz and I'm fine"




