steering wheel change
#2
Registered
Join Date: Jul 2001
Location: Tinley Park, IL
Posts: 5,242
Likes: 0
Received 0 Likes
on
0 Posts
Re: steering wheel change
Originally Posted by ALL IN
can anyone tell me how to remove trim buttons from steering wheel ?can the red inserts be removed?to be powder coated.
The Red buttons can not be removed without destroying the switch. Been there done that. Fountain no longer stocks the switches. They were custom made for Fountain. The manufacturer will special order them.
Dan
#3
Registered
Thread Starter
Join Date: Jun 2005
Location: sandusky/stow ohio
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Re: steering wheel change
Originally Posted by candyman35
The Red buttons can not be removed without destroying the switch. Been there done that. Fountain no longer stocks the switches. They were custom made for Fountain. The manufacturer will special order them.
Dan
Dan
#5
Registered
Join Date: Jul 2001
Location: Tinley Park, IL
Posts: 5,242
Likes: 0
Received 0 Likes
on
0 Posts
Re: steering wheel change
Originally Posted by ALL IN
do you just pull on them or how do you remove?mine say mach performance C R T IS THIS THE SAME AS YOURS?
Dan
#6
Registered
Thread Starter
Join Date: Jun 2005
Location: sandusky/stow ohio
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Re: steering wheel change
Originally Posted by candyman35
Yes I have the Cordless rotary trim wheel. My switches had a nut on the back side of the wheel that needed to be removed. Then the switch comes right out. I wanted to powdercoat my faded buttons but found out the hard way that when you try to pry the button off it will destroy the switch.
Dan
Dan