47 with 3600hp
#1
Registered
Thread Starter
Join Date: Aug 2006
Location: Greenwood, Indiana
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
47 with 3600hp
Just wanted to say hello to the Fountain people. We are a new advertiser on oso. We are an Eliminator Boat dealer but do work on alot of Fountains. Heres a picture of a 47 we just finished for a customer on Lake Cumberland. The engines are 1200hp each and we rigged it with the new Imco hp1000 drives
#3
Platinum Member
Platinum Member
Join Date: Dec 2005
Location: Apollo Beach, FL.
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
Re: 47 with 3600hp
Originally Posted by SchumakerPerformance
Just wanted to say hello to the Fountain people. We are a new advertiser on oso. We are an Eliminator Boat dealer but do work on alot of Fountains. Heres a picture of a 47 we just finished for a customer on Lake Cumberland. The engines are 1200hp each and we rigged it with the new Imco hp1000 drives
#4
Registered
Thread Starter
Join Date: Aug 2006
Location: Greenwood, Indiana
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: 47 with 3600hp
I have a few more pictures on my computer at the shop. I'll post em up in the morning. We built the motors. As far as speed we have not pushed the new set up past 125gps yet. The fuel tanks are factory original. And I will post more pics tomorrow. The only engine pics I have on this computer are a couple procharged 1000s we built for oso member eliminator05
#7
Registered
Thread Starter
Join Date: Aug 2006
Location: Greenwood, Indiana
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: 47 with 3600hp
pm is not to awful bad. They are all hyd. roller so the only thing to worry about is oil changes about every 20 hours. Overhauls are expected in the 150 hour area. Of-course that depends on how hard its run and how well its taken care of.
#9
Registered
Re: 47 with 3600hp
Originally Posted by SchumakerPerformance
pm is not to awful bad. They are all hyd. roller so the only thing to worry about is oil changes about every 20 hours. Overhauls are expected in the 150 hour area. Of-course that depends on how hard its run and how well its taken care of.