LOTO Shootout
09-15-2006 | 05:43 PM
#1
Thread Starter
Registered
Joined: Nov 2000
Posts: 709
Likes: 2
From: Grand Rapids Mi. U.S.
LOTO Shootout
Hey Guy's,
For those interested I won class(single engine 27' no blower) at 92 mph. I was loaded for bear thinking the velocitys were going to make a show. Top speed was a little dissapointing. I coulden't get a clean pass either day because of the rollers at the end of the coarse.
The better news is at Hardy Pond last weekend I showed a hair under 98 mph. I got to woop on some cats, that put a smile on my face.
For those interested I won class(single engine 27' no blower) at 92 mph. I was loaded for bear thinking the velocitys were going to make a show. Top speed was a little dissapointing. I coulden't get a clean pass either day because of the rollers at the end of the coarse.
The better news is at Hardy Pond last weekend I showed a hair under 98 mph. I got to woop on some cats, that put a smile on my face.
09-15-2006 | 07:29 PM
#6
chief fever
Joined: Nov 2005
Posts: 119
Likes: 0
From: Naples Florida
Re: LOTO Shootout
Good job what kind of power is your motor making?What was the fastest v-hull under 30 ft.,what drive are you running?Need to make it there next your still dialing in my combo.540 Chief in a 29 Fever,96 on gps with 4.5 pds. of boost,Tommy is installing a intercooler should have the boat back this week,will post results.
09-16-2006 | 04:52 PM
#10
Thread Starter
Registered
Joined: Nov 2000
Posts: 709
Likes: 2
From: Grand Rapids Mi. U.S.
Re: LOTO Shootout
Originally Posted by chief fever
Good job what kind of power is your motor making?What was the fastest v-hull under 30 ft.,what drive are you running?Need to make it there next your still dialing in my combo.540 Chief in a 29 Fever,96 on gps with 4.5 pds. of boost,Tommy is installing a intercooler should have the boat back this week,will post results.
Im not sure but Leo Wiesman(friend of mine) went 100 in his 26 velocity. He's seen 106 gps on a local lake.
Im running a bravo drive that has been modified. Good luck with your project and please keep us posted.
Last edited by JimV; 09-16-2006 at 05:08 PM.
