no ,,,,,,,,,,,,




a HUSTAINLIMETTE

www.activethunderboats.com :D :D :D

Pick your colors.

get out of here you virus :evilb: :drink:

yeah,,,,,,,,,,, and take your slow as# single step with you....

pushin thta garbage here in real boat land,,,:eek:

Louie,I just installed the same setup on our 05 42 Exec. Have been tweaking props for several months now. What kind of speed/RPM's are you getting? What props are you running? Also, what is your slip? Best speed I have go so far is right @ 100.00 on GPS but only @ 5450RPM's and about 17% slip....our dyno report made the most HP @ about 5750RPM's . Any feedback you could give would be great.

Very good questions, however Matt would be the one to ask.

Matt what's your input.

i have had pretty good success with hydromotives on the big fountains with bravos. p 5's 14 1/4 x 33 right around 5600 5700 with a 1:50 ratio should yield around 103.

Face it Strip...you are a speed guy...you need a Fountain!

yeah what he said,,,,,,,,,,,,


so sell that wobbly goblin and come find yourself.

Thanks for the info...my dumbass forgot to tell you that we are currently running Labed Hydro 34" P5x's with a one inch flared extension welded to the hub. Todd @ Hydro did this in order to reduce the slip. I also have a set of Non-Labed 33" P5x's that I am going to try this weekend to try and get the RPM's up. Also, I just orderd a set of IMCO 2" shorties and am having them installed next week. I'm hoping that the higher x-dimension with the shorties will allow me to run the 34" P5x's and get the RPM's back up to 5600-5700. This unsatiable need for 2-3 more MPH is a SICKNESS!!!! I love it!