Need bow lift!
#1
Registered
Thread Starter
Join Date: Nov 2006
Location: Kennewick, Wa
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Need bow lift!
Looking for some advice. 2001 32 fever, bravo 1's with 2" imco shorties, labbed bravo1 30P props. This boat needs more bow lift on the top end. Sould I try different props or maybe add spacers to the drives? Any help would be appreciated!!
Glad summer has arrived!
Glad summer has arrived!
#3
Registered
Join Date: Feb 2002
Location: Lake Michigan
Posts: 6,627
Likes: 0
Received 0 Likes
on
0 Posts
How far out are you trimming out the drives on the top end?
Im asking because I thought I needed more lift since I installed the -2's.
I went out a little farther than I used too and now it gets up and really goes.
Im asking because I thought I needed more lift since I installed the -2's.
I went out a little farther than I used too and now it gets up and really goes.
#5
Registered
Join Date: Oct 2002
Location: brewerton n.y.
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
maximus lab, 5 blades 15 5\8 di. with the diffusor ring cut off,i picked up over 5 mph on my 35 with 2" shortys.im not sure if the results will be the same on the 32.just my experience.