Thanks! That helps a lot with the decision. The fiberglass guy will be coming to look this winter. If it is a big ordeal to replace this, I'll just dry it out and reglass it, but this time, I'll glass over the top so it won't happen again.

I thought about that, but then if it gets wet, it won't dry out as easy. They can still get wet when fully glassed.

I was thinking of pouring a little resin in that area, until it starts to flow through the limber hole, to fill in the low spot that won't drain. Shouldn't take much, just have to make sure the hull is at the right angle when I do it.