![]() |
Yes, but im really working on my center of gravity, I plan to put 50 -75 lb sand bag in each.
|
Glen George we saw you on oneida lake lake last weekend. we were in the BLUE 32 drifting in front of 3 mile.. its a custom built Fountain with the highest beak in the water. Our cockpit has been relocated 14 inches back from factory making our rear sit real low while the beak is in the sky. Its our second time out with it and will more than likley see you again on the water
|
Very nice boat I thought you had T-572 with 1050 blowers under the hatch.
|
Originally Posted by BLUEMAGIC
(Post 3743329)
Glen George we saw you on oneida lake lake last weekend. we were in the BLUE 32 drifting in front of 3 mile.. its a custom built Fountain with the highest beak in the water. Our cockpit has been relocated 14 inches back from factory making our rear sit real low while the beak is in the sky. Its our second time out with it and will more than likley see you again on the water
|
Originally Posted by BLUEMAGIC
(Post 3743329)
Glen George we saw you on oneida lake lake last weekend. we were in the BLUE 32 drifting in front of 3 mile.. its a custom built Fountain with the highest beak in the water. Our cockpit has been relocated 14 inches back from factory making our rear sit real low while the beak is in the sky. Its our second time out with it and will more than likley see you again on the water
|
It absolutley was, doing buisness with Mike has been a pleasure and we could not be happier with the boat. Mike reinforced the entire boat and moved the cockpit backwards roughly 14 inches making it really sleek with and extra long beak. Drew Marine built the previous powerplants and calls it INDESTRUCTABLE and probably the best built Fountain out there. It truley is a "ONE OF A KIND FEVER".
|
1 Attachment(s)
I added 2 more for a total of 4, plus the two factroy ones.
|
where are you getting the covers from, and what are you cutting the holes out with?
|
Originally Posted by jmoore1225
(Post 3750506)
where are you getting the covers from, and what are you cutting the holes out with?
|
ebay $32.95 greatlakesskipper. I drilled a key hole and used a hanger to insure im centered and a hole saw. There are two compartments up there.
|
| All times are GMT -5. The time now is 10:12 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.