What to look for?
#4
Registered
Joined: Jul 2006
Posts: 881
Likes: 0
From: Seabrook, Tx
If that doesn't work out for you, take a look at Gulf Coast Boating. See Andrew, he is a sales guy. I bought my old boat, a 32' Sunsation Dominator from them. They are good people and honest. They usually have several performance boats and their prices are fair. Here is a link.
http://gulfcoastboatingcenter.com/li...owerboats.html
Tell him Gerrit sent you.
http://gulfcoastboatingcenter.com/li...owerboats.html
Tell him Gerrit sent you.
#5
i have a 93 that shows very clean haven't listed it yet waiting to get some pictures it's in storage .i will compare mine to any older 35 out there and it will go for around 50k with alot of upgrades put 20k plus into it last winter alone just something to compare with !
#6
Registered
Joined: Jun 2006
Posts: 718
Likes: 0
From: Medina Ohio
#7
you also dont even know what your bill is for all the work that your doing but damn i hope you can keep up with you know who when your done!!!!!!!!
#8
Registered
Joined: Jun 2006
Posts: 718
Likes: 0
From: Medina Ohio
All Ins boat is sweet with lots of upgrades. Someone buy his so I can sell him mine. Tony- My project this winter has been a real adventure.
#9
Registered
Joined: May 2007
Posts: 424
Likes: 0
From: Linwood, Saginaw Bay
get a moisture check on the stringers and transom, they tend to get water logged and can rot/ crack. Also, check the hull for any hooks, or bubbled gel coat on the running surface.
90 hours? only used it one day a year?... Get the real mechanical hx. on it. Carder
90 hours? only used it one day a year?... Get the real mechanical hx. on it. Carder
#10
scan the brains for history. hours, time at rpm, trouble codes , etc,,,.
moisture meter.
look at starter for corrosion, this will tell you if the boat has had water issues.
pull drives and inspect gimbals.
moisture meter.
look at starter for corrosion, this will tell you if the boat has had water issues.
pull drives and inspect gimbals.



