new fever owner in ontario
 

Hi i am new to fountains,i have a 29 fever, i have had boats for years but this is the biggest yet and first with twins.
Big change from the other boats i have had.

where in Ontario are you located?

Congratulations and welcome to the board. Fevers rule:evilb:

Hey airpacker this is Brian from scugog.We decided to go bigger.

Wow, big step up Brian. You are gonna enjoy the ride.

Hows the big dead carp pond doing this summer?

I told you after the wife rode in yours i would have to go bigger.:drink:
I dont boat on scugog anymore we bought a place on chimonge and we boat up there and sturgon,
The stv had only been out three times in the last two years so it was time to move up to a bigger ride.
not used to going so slow now.


hows thing with you?bigger power now?

Hey Brian, congrats on the new ride.
Send me a PM if you plan on being up in the Orillia area. My boat is up on Georgian Bay now for the next three weeks on my friends lift right in Midland Bay, will be back on Couch after that.

Cangrats again;

Jay

chimonge? better watch out for the weeds :) Might be a real good idea to invest in a set of sea strainers and water pressure gauges for the boat Brian. Asd for going slower now, no worries, you'll burn gas faster :)

Ya need to get the boat up to Couchiching for the long weekend. Big party at Big Chief Island every long weekend. More room on Simcoe to stretch out the legs on the boat too.

Look up Pull My Trigger here on OSO. Doug is in Oshawa and has a twin SBC powered 29 fountain too. He just did a repower on his ride and I'm sure he could answer any questions you might have about your boat.

As for my cat, I started last year on a major repower and re rig program. Everything seems to take forever but its coming along.

Chemong...........weedy on either end, anywhere east of the causway to the narrows is fine and is home to the best ramp in the whole area (Dutch Marine) and Im talking from Balsam Lake to Buckhorn........was up there last Sunday tripped from Dutch to Burliegh Falls, been going up there since 95......you got big blocks in yours??......post some pics!!!

Mine are small blocks as well.We were up on balsom yesterday and lets just say it didnt go well.Had some wiring problems on the stb motor so it wouldnt start ,after i got it running the port motor let go putting two rods through the pan.So repowered today with a rebuilt one i had , going to rewire tomorow (some holidays :mad:).I had to replace all the power cables and both engine harneses.Spent alot of money this week on it but should have it going for the weekend.


I love boating :drink: all part of buying a used boat.I will be putting two new motors in the winter and converting to mpi as well.Once i get it all sorted out it will be good.