27 fountain video
11-15-2008 | 04:06 AM
#1
Thread Starter
Registered
Joined: Nov 2000
Posts: 709
Likes: 2
From: Grand Rapids Mi. U.S.
27 fountain video
Hey guy's thought I'd share this video of my speed run, a little shaky at the end
http://www.youtube.com/watch?v=e_8c5tyH9VE
http://www.youtube.com/watch?v=e_8c5tyH9VE
Last edited by JimV; 11-15-2008 at 04:10 AM.
11-15-2008 | 08:42 PM
#7
Registered
Joined: Jan 2007
Posts: 1,667
Likes: 0
Hey guy's thought I'd share this video of my speed run, a little shaky at the end
http://www.youtube.com/watch?v=e_8c5tyH9VE
http://www.youtube.com/watch?v=e_8c5tyH9VE
congrats!!
11-16-2008 | 02:23 PM
#8
Thread Starter
Registered
Joined: Nov 2000
Posts: 709
Likes: 2
From: Grand Rapids Mi. U.S.
Hey thanks guy's. The engine is a 565 ci with a dart block and heads. compression ratio 10.5: 1, hydraulic roller cam with a holley tunnel ram efi. I run a stellings box with a 1.5 ratio bravo (non XR gears) turning a 30" labbed b1 four blade at 6100 rpm.
It wants to chine a little at 70 but once you drive thru it the boat settles nicely. It's a rush to drive
It wants to chine a little at 70 but once you drive thru it the boat settles nicely. It's a rush to drive
Holy Szit!!How can you walk!!! With a set that Big!!!! Thats Impressive!!!!
11-16-2008 | 06:34 PM
#10
Registered
Joined: Jan 2007
Posts: 1,667
Likes: 0
Hey thanks guy's. The engine is a 565 ci with a dart block and heads. compression ratio 10.5: 1, hydraulic roller cam with a holley tunnel ram efi. I run a stellings box with a 1.5 ratio bravo (non XR gears) turning a 30" labbed b1 four blade at 6100 rpm.
It wants to chine a little at 70 but once you drive thru it the boat settles nicely. It's a rush to drive
It wants to chine a little at 70 but once you drive thru it the boat settles nicely. It's a rush to drive
