Fountain speaker delete LOGO plates
#1
Registered
Thread Starter
Join Date: Jun 2005
Location: NY
Posts: 716
Likes: 0
Received 0 Likes
on
0 Posts
Fountain speaker delete LOGO plates
I am looking for the "Speaker Delete" plates that have the fountain logo and light up. I have them in my 93 35' but they have cracks and are ugly and want some new ones. Any Ideas?
#5
Registered
I had to trim mine to fit the JBL 6.5" I put in, not a big deal just watch your wires on the starboard side.
All depends on the motor size and depth, but make sure you have clearance for the back of the speaker so you don't "load' it by restricting the air movement.
All depends on the motor size and depth, but make sure you have clearance for the back of the speaker so you don't "load' it by restricting the air movement.
#7
Banned
[QUOTE=MILD THUNDER;3366277 Not positive, but I think you may be able to take the factory logo/light piece and dissassemble it...get a new piece of acrylic made for it and look like new...maybe some colored acrylic to match your interior![/QUOTE]
the light can be dissasembled in 3 pieces & the acrylic has 1" painted ring as the boarder ..easier to buy NEW and you'll have to rewire as the NEW lights dont match the old plugs ..ph@chin Fountain
the light can be dissasembled in 3 pieces & the acrylic has 1" painted ring as the boarder ..easier to buy NEW and you'll have to rewire as the NEW lights dont match the old plugs ..ph@chin Fountain
#8
Registered
Join Date: May 2006
Location: Jackson, Mississippi
Posts: 448
Likes: 0
Received 0 Likes
on
0 Posts
Substituted speakers for mine a month or two ago. Didn't want to spend $600 that I was quoted for replacements that I thought dated the boat. You really could redo them or make new with any logo you wanted. Two pieces of plexiglas with LED lights.
#9
Banned
$600.00 sounds like you almost got it & without any Vasel!ne right out of fountain there $ 161.00 BIG Daddy
Last edited by RunninHotRacing163.1; 04-02-2011 at 08:24 AM. Reason: spelign