27 Fever- Optimum SS Propeller
05-24-2011 | 02:28 PM
#14
Registered
Joined: Mar 2011
Posts: 18
Likes: 0
From: Commerce Twp, MI
I just ran mine over the weekend. 4 people and full tank ran 75mph. Tabs at 2 and drive at 5. I've only had mine out a couple hours so far.
What's the best setting for the tabs/drive to start at when getting on plane? Just want to be as easy on the drive as possible.
What's the best setting for the tabs/drive to start at when getting on plane? Just want to be as easy on the drive as possible.
05-26-2011 | 02:19 PM
#15
Registered
Joined: Apr 2010
Posts: 417
Likes: 0
From: Lake Texoma, OK
Coming out of the hole I run my drive all the way in and my tabs all the way down...
06-01-2011 | 04:21 PM
#16
Registered
Joined: Jun 2008
Posts: 57
Likes: 0
From: wendell,nc
What's the best setting for the tabs/drive to start at when getting on plane? Just want to be as easy on the drive as possible.
Tabs full down and drive all the way down also. then pull tabs up then drive.
Tabs full down and drive all the way down also. then pull tabs up then drive.
09-30-2011 | 07:00 PM
#17
Thread Starter
Registered
Joined: Mar 2011
Posts: 32
Likes: 0
From: NY
Bought the labbed 26 Bravo
what a difference
75 on the speedo all day long with 4 people full of fuel (compared to 68 with the Mach)
i forgot the rpm, tabs and trim nos.
i'll post them next year when i get her back in the water
boat feels more stable and smoother and it planed even better
the prop woke the boat up
what a difference
75 on the speedo all day long with 4 people full of fuel (compared to 68 with the Mach)
i forgot the rpm, tabs and trim nos.
i'll post them next year when i get her back in the water
boat feels more stable and smoother and it planed even better
the prop woke the boat up
08-23-2012 | 06:01 PM
#18
Registered
Joined: Aug 2012
Posts: 1
Likes: 0
From: Midlothian,IL.
1994 fever 27 new crate engine 5026TX 415HP MPI old bravo 24 running 66 -67 MPH at 4900RPM-5000RPM
prop shop gave me a 23 revolution to demo last weekend 5000RPM 65 MPH . 24 was much better getting on plane. but it is old been repaired that can only explain none or little RPM change.I am going to try a bravo 1 26P demo this weekend hoping for better results .any input would be greatly appreciated.
prop shop gave me a 23 revolution to demo last weekend 5000RPM 65 MPH . 24 was much better getting on plane. but it is old been repaired that can only explain none or little RPM change.I am going to try a bravo 1 26P demo this weekend hoping for better results .any input would be greatly appreciated.
09-30-2012 | 01:23 PM
#19
Registered
Joined: Dec 2010
Posts: 310
Likes: 0
From: Lake Ariel PA
1994 fever 27 new crate engine 5026TX 415HP MPI old bravo 24 running 66 -67 MPH at 4900RPM-5000RPM
prop shop gave me a 23 revolution to demo last weekend 5000RPM 65 MPH . 24 was much better getting on plane. but it is old been repaired that can only explain none or little RPM change.I am going to try a bravo 1 26P demo this weekend hoping for better results .any input would be greatly appreciated.
prop shop gave me a 23 revolution to demo last weekend 5000RPM 65 MPH . 24 was much better getting on plane. but it is old been repaired that can only explain none or little RPM change.I am going to try a bravo 1 26P demo this weekend hoping for better results .any input would be greatly appreciated.
