Offshoreonly.com
Page 4 of 5
« First
2
3
4
5
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Fountain (https://www.offshoreonly.com/forums/fountain-37/)
-   -   42 Poker Run Vid (https://www.offshoreonly.com/forums/fountain/252158-42-poker-run-vid.html)

chattviper 04-26-2011 09:03 AM
Yes, the 6 blades I was all over the rev limiters w this last upgrade (700 cam)

Before the cam upgrade I was 115-118 w 6 blade 32's

I have the 700sci cam, stage II whipple, dyno at 860hp.

I was very impressed with speeds because I did replace the fuel bladders w aluminum tanks which added about another 400lbs.

Yes, happy and content.....for this year! :lolhit:



Originally Posted by 575cat (Post 3387301)
So your saying it runs out faster with the 7 blades vs 6 , are the 7 blades thicker castings ? what kind of speeds did you gain from the hp upgrade , sounds by the vid your happy and content .

575cat 04-26-2011 10:07 AM
Thats great when everything works out the way you wanted it to , excellent ride .

eddie 04-26-2011 04:53 PM
Originally Posted by chattviper (Post 3387320)
Yes, the 6 blades I was all over the rev limiters w this last upgrade (700 cam)

Before the cam upgrade I was 115-118 w 6 blade 32's

I have the 700sci cam, stage II whipple, dyno at 860hp.

I was very impressed with speeds because I did replace the fuel bladders w aluminum tanks which added about another 400lbs.

Yes, happy and content.....for this year! :lolhit:
Did you also go to a two stage sea water pump and have the stock intercooler fittings changed to high flow with the stage II?

vegaskeith 04-27-2011 12:09 AM
You buried that speedo! Awesome!:drink:

c_deezy 04-27-2011 01:28 AM
I love the 42 PR's! Very badass video.

chattviper 04-27-2011 07:16 AM
I didn't have to do the stage 2 sea pump. Both my drives and a separate water pick up feed the sea strainer. I have plenty of water pressure. Yes, i did upgrade to the high flow intercooler fittings.


Originally Posted by eddie (Post 3387775)
Did you also go to a two stage sea water pump and have the stock intercooler fittings changed to high flow with the stage II?

dykstra 04-27-2011 04:35 PM
Way cool!!

crayolacrazy 12-25-2011 11:45 AM
Originally Posted by Strip Poker 388 (Post 3386191)
thats some good #'s!! Have ya thought about Whipples upgrade kit for the 600's?
it must of allready had it thats the only way it could pass the rev limiter

JMPH 12-25-2011 01:09 PM
Originally Posted by chattviper (Post 3387320)
Yes, the 6 blades I was all over the rev limiters w this last upgrade (700 cam)

Before the cam upgrade I was 115-118 w 6 blade 32's

I have the 700sci cam, stage II whipple, dyno at 860hp.

I was very impressed with speeds because I did replace the fuel bladders w aluminum tanks which added about another 400lbs.

Yes, happy and content.....for this year! :lolhit:
I think you have a stage 4, your limiter and flame arestors are stage 4. Great video!!

PARADISE ISLAND 12-25-2011 10:25 PM
That boat is dialed in great!nice video!!


All times are GMT -5. The time now is 08:44 AM.
Page 4 of 5
« First
2
3
4
5
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.