Offshoreonly.com
Page 2 of 4
1
2
3
4
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Fountain (https://www.offshoreonly.com/forums/fountain-37/)
-   -   Winter Project on the 38 Fever (https://www.offshoreonly.com/forums/fountain/252185-winter-project-38-fever.html)

tomtbone1993 04-25-2011 10:21 PM
What type of material is on the stringers?

Fanatic 04-25-2011 10:43 PM
Funny to see the words Lipship associated with Fountain...

Fanatic 04-25-2011 10:44 PM
How fast was the boat with the 625's? What's the torque rating on the 710's?

Marginmn 04-26-2011 07:08 AM
With a set of test props from Fountain it saw a tick over 89. With the set of labbed 27 px5s that I had on it the boat would run 88 at around 5800 rpm with a good load in it. The boat has standoff boxes on it so the dirves may be a bit lower in the water than would be idea.

The play on Lippship was DJ's idea :)

Marginmn 04-26-2011 10:05 AM
Originally Posted by Bad Bird (Post 3387059)
I saw the work in progress myself last weekend....I agree, DJ takes great pride in what he does and will make sure you get a top notch rigging job.
If you check up on him again make sure he isn't taking any extra long lunch breaks :lolhit:

Trippin 04-26-2011 10:23 AM
Originally Posted by tomtbone1993 (Post 3387105)
What type of material is on the stringers?
Anodized engraved aluminum plate. 1/8" +/-

Sydwayz 04-26-2011 11:16 AM
Why the "Lippship" on the stringers?

www.lipship.com It's one "P" in Phil's naming convention.

Marginmn 04-26-2011 11:36 AM
My last name is Lipps

Wildman_grafix 04-26-2011 11:44 AM
Originally Posted by Marginmn (Post 3387506)
My last name is Lipps
Ahhhhh good one.:lolhit:


All times are GMT -5. The time now is 07:27 PM.
Page 2 of 4
1
2
3
4
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.