RUB Rail Insert for Fountain Fever
#1
Thread Starter
Registered
Joined: Aug 2010
Posts: 151
Likes: 0
From: 1000islands - Ontario
White rub rail insert for Fountain Fever, does that have to come from Fountain direct of is any aftermarket company making it. Has to have the correct channeling/width, most aftermarket I'm seeing through Southern Marine/West Marine etc doesn't look the same.
thanks
need enough for 32 Fever, main rail portion is in decent enough shape
thanks
need enough for 32 Fever, main rail portion is in decent enough shape
#2
TACO is the manufacture. I ordered mine thru WM's special order department. The 20' legnths available from WM online or at the stores were too short, as with most other suppliers of the insert. I wanted a 1 peice lenght, thus had to go thru their special order department.
http://tacomarine.com/cat--Rigid-Rub...ex_insert.html
I believe this is the pt # I bought:
http://tacomarine.com/item--1-x-1-2-...-V12-0303.html
http://tacomarine.com/cat--Rigid-Rub...ex_insert.html
I believe this is the pt # I bought:
http://tacomarine.com/item--1-x-1-2-...-V12-0303.html
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Last edited by US1 Fountain; 06-05-2011 at 10:14 PM.




