Sun deck cushions
#2
Registered

Joined: Jan 2004
Posts: 5,325
Likes: 112
From: Northern NY
Yes. Should be small plastic plugs on the underside, fiberglass portion, that cover the holes where the screws go into the base of the pad itself. Just pop them out and remove the screws, very easy to do. Can be a slight pia when goig back on to get the holes to line up but not an impossible deal.
#3
Thread Starter
Registered
Joined: Aug 2007
Posts: 531
Likes: 2
Yes. Should be small plastic plugs on the underside, fiberglass portion, that cover the holes where the screws go into the base of the pad itself. Just pop them out and remove the screws, very easy to do. Can be a slight pia when goig back on to get the holes to line up but not an impossible deal.



