02 35' w/575's prop question
09-28-2011 | 12:36 PM
#21
Thread Starter
Registered
Joined: Oct 2001
Posts: 73
Likes: 0
From: Germantown,Ohio
Thanks Guys.
Talked to Allen yesterday. What a wealth of information. Very knowlegeble and nice guy. He confirmed Kelly O's advice to reach my goal. Kelly what rpm were you turning the 32's to reach 103 mph? Also where were tabs and drives?
Talked to Allen yesterday. What a wealth of information. Very knowlegeble and nice guy. He confirmed Kelly O's advice to reach my goal. Kelly what rpm were you turning the 32's to reach 103 mph? Also where were tabs and drives?
09-28-2011 | 07:51 PM
#22
Registered
Joined: May 2004
Posts: 1,263
Likes: 21
From: Auburn, New York
5600 RPM, on limiters after upgrade.
Tabs neutral, seems like they were about three.
Drives around 4, depending on chop; flat water if you over-trim it will start chining, more forgiving and more speed with some nice chop.
Fuel load and number of passengers as well as air temperature/humidity will factor in also.
Tabs neutral, seems like they were about three.
Drives around 4, depending on chop; flat water if you over-trim it will start chining, more forgiving and more speed with some nice chop.
Fuel load and number of passengers as well as air temperature/humidity will factor in also.
