question for reggie fountain
#1
question for reggie fountain
reggie,i have a 99 38 foot fever with #6 drives,it had what were thaught to be 900 hp engines,anyway,before bying the boat,while on a test ride with the owner,the port motor expired,so i have no real knowledge of what top speed would have been,or at what rpm it maxed at,moving on,i have made big changes to the engines,8.3L whipples,etc.new power dyno,d at 1200 hp at 6500 rpm.the drives have 1.5 ratio gears and 17.5 dia 35 p 4 blade props,my question is,with the additional power,should i change gear ratio to something like 1.3,or will i be ok with the 1.5.ratio.any input will be very much appreciated.
#5
Registered
Check out the web site it has all the contact info. They answer the phone and they will all be very helpful
Here's the link
http://fountainperformancemarine.com/
P.S. I think you need some bigger wheels maybe more blades too
Here's the link
http://fountainperformancemarine.com/
P.S. I think you need some bigger wheels maybe more blades too
Last edited by mcprodesign; 02-27-2012 at 11:40 PM.
#6
Registered
Join Date: Jun 2011
Location: Thousand Islands area
Posts: 2,349
Likes: 0
Received 4 Likes
on
3 Posts
Check out the web site it has all the contact info. They answer the phone and they will all be very helpful
Here's the link
http://fountainperformancemarine.com/
P.S. I think you need some bigger wheels maybe more blades too
Here's the link
http://fountainperformancemarine.com/
P.S. I think you need some bigger wheels maybe more blades too