![]() |
1995 27 fever how fast
Gonna have 600 to 650hp what kinda of speed should i see
|
70mph!!
|
Mine dynoed right at 600hp. 83mph.
In it's stock form, HP465, it was a 68-69 ride. '94 |
Originally Posted by brbracing
(Post 3713126)
Gonna have 600 to 650hp what kinda of speed should i see
|
She'll run in the low to mid 80's but will be a handful, she'll chine walk, and kind of flutter in the air
|
Originally Posted by Von Bongo
(Post 3713161)
Be forwarned of the chine walk around the mid 70s
|
Mid 80s.
|
Stepped hull 29's with a 575 SCi ran 78 - 83 mph, so you should be in that range. My friend had a 91 27 Fever with a setup similar to US1's and his ran 81 on GPS without a lot of "excitement". My 96 stepped hull 27 Fever with a HP500 (slightly higher compression than stock :D) ran 76 gps, but it was a real handful at about 75 and you really had to pay attention to what it was doing, up to the point where you had to back out of it. Would use the max speed recall on the gps to see how fast it actually went ... was too busy driving to try to watch the gps. Is your's stepped or staight hull? (I think 1995 was first production year for them, but it may have been 94. Another friend has a 98 27 Fever with a HP500 and B&M 250 on top with ~6-8 psi boost and his can get pretty violent at ~78 mph. He has enough power though, that he can fool with his tabs somewhat and get a couple more mph before it chine walks too bad.
|
:bsflag::bsflag::bsflag::bsflag:
|
Reality. Mid 70s all day. 80 if you have fuel to waste and nobody in the boat to share the thrill
|
| All times are GMT -5. The time now is 05:06 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.