I Need a new hatch!!!
#1
Registered
Thread Starter
Join Date: Aug 2008
Location: Kennesaw , Ga
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
I Need a new hatch!!!
Had a friend fall through my hatch, and was wondering if anyone knew where I could get one, or have one made? I have a 1996 35 lightning/ex. The boat is solid white and would like the hatch to be as well. Thanks in advance for any help! I measured the hatch, and the dimensions I got were 18-3/4"x21-1/2"
Last edited by frenchfri21; 07-05-2012 at 05:28 PM.
#5
Registered User
Gold Member
Join Date: Apr 2007
Location: prince george,va
Posts: 1,474
Likes: 0
Received 0 Likes
on
0 Posts
any good fiberglass guy should beable to make you one so long as he can use the old hatch as a template/mold.had one made for a pachanga about 10yrs ago.it looked nice.
#10
Registered
Join Date: Jun 2010
Location: Omaha, NE, LOTO
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
I made my own out of aluminum. I didnt like all the screw holes for the hold downs on the outside so i welded brackets on the inside. Then I painted it to match. Its slightly heavier but you wont damage it by walking on it.