35 execusioner bumper holder engine compartment
#1
Registered
Thread Starter
Join Date: Apr 2011
Location: JOHNSBURG, ILLINOIS
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
35 execusioner bumper holder engine compartment
Has anyone installed bumper holder in a 35 ex or older 35 fever, lightning. I need more space to put bumpers.
#2
Registered
There's plenty of room back there, but I've never seen a fender holder in a 35. My suggestion: buy the flat fenders. They are GREAT (pricey, but worth it), and store easily.
#3
Registered
Join Date: May 2011
Location: Dallas, TX
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
I installed 2 of those very common stainless double fender holder in the rear bulkhead of my backseat right in front of the motors. they are both angled and 45 degree angles but works great and holds my 4 fenders. You just have to tie the ropes up so they won't bounce into the belts.
#4
Registered
iTrader: (1)
I installed 2 of those very common stainless double fender holder in the rear bulkhead of my backseat right in front of the motors. they are both angled and 45 degree angles but works great and holds my 4 fenders. You just have to tie the ropes up so they won't bounce into the belts.
Any pics?
#6
Registered
Join Date: Aug 2006
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered
Join Date: May 2011
Location: Dallas, TX
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
I am looking for 280 trim tab plates mine need to be replaced . contact me [email protected]
Where did this post come from?!? ^
#9
Registered
Join Date: Aug 2006
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts