some 32 questions
01-31-2014 | 09:10 AM
#94
Ginger or Mary Ann?
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
Sorry guys, but I don't think the boss would care for me to be using company equipment for others. I can and do use them as they are mine, so rather not jeopardize that
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
01-31-2014 | 10:25 AM
#96
Ginger or Mary Ann?
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
It's 316 SS. Single piece, turned on CNC lathe.
Back side. Not sure why I took this pic? possibly for the helm bolt clearance detail. Been some 5 yrs or so. It slips over the helm shaft and uses a set screw to secure. I turned it to match the taper and Dia of the hub. I think I still have the sketch of when I made it. I keep all those worthless prints.
Back side. Not sure why I took this pic? possibly for the helm bolt clearance detail. Been some 5 yrs or so. It slips over the helm shaft and uses a set screw to secure. I turned it to match the taper and Dia of the hub. I think I still have the sketch of when I made it. I keep all those worthless prints.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Last edited by US1 Fountain; 01-31-2014 at 10:27 AM.
01-31-2014 | 12:02 PM
#98
Thread Starter
Registered
Joined: Jan 2005
Posts: 4,822
Likes: 376
From: IL
