had Fountain make me some cup holders..

while Im waiting for the sun pad I am redoing/paint the dash,,removing it was fun:lolhit:

Dash and shifters are almost done,,need to drop dash panel off tonight to the pinstripe guy and get the labels painted back on and clear it one more time and install

Painted dash,,shifters and side panel are in.....

Fountain just finished my new sunpad skin

What are you doing for sunpad foam?

Got it from Fountain as well...I just have to buy the board locally..

Was that included in the price? I know someone quoted $1600 for sunpad, headrests and foam. Not sure if that meant the sunpad foam or not. Thanks in advance. I keep putting off ordering mine for no real reason.

I will have to look at the receipt but it was extra..that price is for the skin of the sun pad and the 1st row skin

Looks sweet!!

My buddy Calvin (pwrquest) did some more paint work,,,
can anybody guess what brand the boat is???:lolhit:

Got some quotes today.

Skins only
$244.67 first row of sun pad the includes headrests
$1012.18 one large piece of sunpad with logo/32
$213.08 rear seat back
$204.30 rear seat bottom

Rear rails
$218.42 each stainless

Docking lights
$606.96 pair (just need the covers)

yep that sounds right..

what color combo?

The boats main colors are purple/black with a small bit of yellow. I'll likely do the 32 in black with yellow shadowing and a purple fountain symbol. What would you suggest? Yours came out great.

Btw, I thought I read in another thread that you were going to do a 3/4 piece pad. What made you go with the 1/1 piece?

OK, so my gf's co worker took your sunpad pic and used my colors on it and I have to say, I don't really like it. Not bad for 5 minutes of work.
(sorry for the hijack and stealing your image)

I would make the logo Black,,,the 32 purple with a yellow drop shadow

Yep you are correct,,,I was going to go with a 3 piece but there was a misunderstanding and it was made out block numbers which is not what I wanted,,so they made me the correct skin and we worked out and now I have 2 sun pads,,,

Am I the only one that wants to know why the window is broken out?

Mine is the 2 piece sun pad. Looks good when sitting, but when running, the larger rear section vinyl looks like it stretches back with a large bulge along the very back edge. Lots of free unfastened material in that section. The 3 piece I'd assume won't have this problem. A buddies Cig, and my Baja both do the same thing, so not just a Fountain condition.

Black on that pad will be hot, and the purple to an extent. I keep a comforter tucked under the front hatch edge and just pull it down onto the rear seat when moving. When stopped it always gets spread back out over the hatch. Keeps the wear/pulling off all the sticking and not so slippery to walk on. Still looks brand new 14 yrs later and no fallen lawsuits. :)

they put in pull down straps on the inside so my 1 piece sunpad wont do that,,wil see

I thought of doing that to, but never got past the thinking of it part.

All your work is looking good!

Actually happened via a ladder I threw in the bed over the side. Literally just nicked it and it just spidered. (The reason it's posted was because its one of the only pictures I have that shows the purple, that usually shows as black)


Supposed to get a few more samples sent via email today. I'll let the fountain fans be the judge.

ok..the cabin doors,glove box,cabin mirror,compass cover,4 compartment doors,,new speakers,,amp,,and 1st row on the sun pad are in..

time for a beer:ernaehrung004:

That looks good, nice job on getting the fades to line up.

Looks great Tom...I love its one of a kind!!!

wired remote is in,,,
I think that is one of the better options I added on the boat.

new sun pad,,,

Looks damn good. Nice work.

added some k&N air filters,,,

shore power
 

bored so i added shore power,,outlet in the cabin and battery charger for now..

Battery relocation 32 fever
 

Ive been thinking also. I'm re-riging my boat. Moving the two batterys up from the engine bay to the side compartment to help my center of gravity. I would have to trim out the opening a little behind the panel. Anyone done this?

ok,,,so Im thinking of adding this down turn pipes to the boat,,thought is if I direct the exhaust down it might not rattle the boat as it does now at idle with exhaust open,,,

you guys see any reason why I should not do it??water reversion or anything like that??boat has 502s

I ran 4" rubber downturns with out any issues with my 32 with 502s, worked well and only cost $100 for 4. I moved up my batteries this weekend. I did not have to trim out anything. Ideal is to take some wt off the transom and hopefully raise it up a little.

did that take the rattle away at idle??

any other thoughts????

US1 Fountain?????

YES. I left the silent choice open. Quiet off plane.

As long as your existing pipes have a stainless flapper in them you should be fine.

Yes they do have the internal flappers,,,
I went ahead and ordered 4 turn downs,,I let you guys know if it solves the rattling issue,,once in the water

I guess I don't see the difference of using those vs just using the silent choice at idle. Or do you not have silent choice?