shore power
 

bored so i added shore power,,outlet in the cabin and battery charger for now..

Battery relocation 32 fever
 

Ive been thinking also. I'm re-riging my boat. Moving the two batterys up from the engine bay to the side compartment to help my center of gravity. I would have to trim out the opening a little behind the panel. Anyone done this?

ok,,,so Im thinking of adding this down turn pipes to the boat,,thought is if I direct the exhaust down it might not rattle the boat as it does now at idle with exhaust open,,,

you guys see any reason why I should not do it??water reversion or anything like that??boat has 502s

I ran 4" rubber downturns with out any issues with my 32 with 502s, worked well and only cost $100 for 4. I moved up my batteries this weekend. I did not have to trim out anything. Ideal is to take some wt off the transom and hopefully raise it up a little.

did that take the rattle away at idle??

any other thoughts????

US1 Fountain?????

YES. I left the silent choice open. Quiet off plane.

As long as your existing pipes have a stainless flapper in them you should be fine.

Yes they do have the internal flappers,,,
I went ahead and ordered 4 turn downs,,I let you guys know if it solves the rattling issue,,once in the water

I guess I don't see the difference of using those vs just using the silent choice at idle. Or do you not have silent choice?