32 sunpad
#23
Registered
iTrader: (1)
Join Date: Aug 2012
Location: Sarasota FL
Posts: 635
Likes: 0
Received 0 Likes
on
0 Posts
I bought the foam assembly for the front row of head rest which was $600.00. The covers were $1000.00. You may not need the foam but I wanted to make sure all my curves and seems were nice and square. So I spent the extra money. Guy the interor supervisor at Fountain thought it was a waste of money but I did it anyhow.
#24
Registered
iTrader: (1)
I did new foam too, and was pleasantly surprised that the foam was of higher density (much harder) than original (2000MY).
I bought the foam assembly for the front row of head rest which was $600.00. The covers were $1000.00. You may not need the foam but I wanted to make sure all my curves and seems were nice and square. So I spent the extra money. Guy the interor supervisor at Fountain thought it was a waste of money but I did it anyhow.
#29
Registered
iTrader: (1)
Join Date: Aug 2012
Location: Sarasota FL
Posts: 635
Likes: 0
Received 0 Likes
on
0 Posts
Tom post some pictures when you get yours. Guy told me the samething.I really wanted to go that route as well but my interior guy didnt think it would look as good this way with the logo going down in the seems of the sections so I went with the front row and the rest in all one peice.
#30
Registered
iTrader: (1)
Join Date: Aug 2012
Location: Sarasota FL
Posts: 635
Likes: 0
Received 0 Likes
on
0 Posts
Jmoore I think you miss understood.Tom was trying to sell his old cover for $350.00. The whole deal with the Fountain Logo sewn in was right around $1600.00.This was from the Fountain factory.