Interior fasteners
10-31-2012 | 09:48 PM
#22
Registered
Joined: Oct 2011
Posts: 131
Likes: 0
From: ontario canada
10-31-2012 | 10:02 PM
#23
Registered
Joined: Sep 2009
Posts: 1,358
Likes: 2
From: Coal City ,IL
That boat was a 93 i think..... i would say the fist time you start to feel stuff get soft. Tear it out that winter. The better shape its in when you take it apart the asyer it will be for ya. I think rob will vouch for that
11-01-2012 | 11:26 AM
#25
Ginger or Mary Ann?
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
Damn, that wood is nasty.
Be sure to post pics of the finished project. Should be a new boat when done!
Be sure to post pics of the finished project. Should be a new boat when done!
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
11-01-2012 | 02:37 PM
#26
Thread Starter
Registered
Joined: Jul 2012
Posts: 78
Likes: 0
From: Illinois
Yes it is bad a few pieces have been redone in the past but it is past time for the rest I hate when things are left too rot luckily the rest of the boat is solid or this wouldnt be worth redoing I will keep pics coming on process starting too template and cut things now
11-03-2012 | 06:08 PM
#28
Registered
Joined: Sep 2009
Posts: 1,358
Likes: 2
From: Coal City ,IL
If I remember correctly the back seat was not bolted in yet in the pics... I think it was tight on the other side. And the headrest I had a choice of making it tight and having gaps or loose with wrinkles. In hind sight I would have added a half inch of foam on each side of the head rest.
11-05-2012 | 07:45 PM
#30
Thread Starter
Registered
Joined: Jul 2012
Posts: 78
Likes: 0
From: Illinois
