04 35' Lightnin to 07 - Same Hull?
#1
Thread Starter
Registered
Joined: Jan 2011
Posts: 26
Likes: 0
From: Louisiana, USA
Question for the experts out there:
I'm looking at upgrading my '04 35' Lightnin to an '07 35' Lightnin. My '04 is side by side and the' 07 is a staggered setup. I'm keeping my trailer in the deal - will the '07 fit my existing trailer and lift with no modifications?
I'm not sure if there were any hull changes between those years as far as step spacing, deadrise angle, etc.
Many thanks!
I'm looking at upgrading my '04 35' Lightnin to an '07 35' Lightnin. My '04 is side by side and the' 07 is a staggered setup. I'm keeping my trailer in the deal - will the '07 fit my existing trailer and lift with no modifications?
I'm not sure if there were any hull changes between those years as far as step spacing, deadrise angle, etc.
Many thanks!
#3
Thread Starter
Registered
Joined: Jan 2011
Posts: 26
Likes: 0
From: Louisiana, USA
Thanks - I was thinking they were, but just trying to confirm. I also followed up with Fountain yesterday and asked for the trailer manufacturer diagram that shows all the hull dimensions and they sent me the same drawing I had before, which was done in 2000 so I assumed that was the case.




