Cabin Seats
#1
Thread Starter
Registered
Joined: Dec 2004
Posts: 179
Likes: 2
From: Gloucester, N.J.
(1993 35 Lightning) Trying to take out the cabin seats, the middle piece just lifts out but the two side pieces are according to fountain are screwed in with four screws along the seam running the length of the cushion.I cannot locate the screws, has anyone on here ever removed these seats and if so whats the secret. Fountain also said if you can't locate the screws just put a flat bar the under the seat and more or less pry the seat screws and whatever else comes with it out. Any suggestions appreciated.
#2
Registered

Joined: Jul 2007
Posts: 3,648
Likes: 32
From: Oneida Lake NY
(1993 35 Lightning) Trying to take out the cabin seats, the middle piece just lifts out but the two side pieces are according to fountain are screwed in with four screws along the seam running the length of the cushion.I cannot locate the screws, has anyone on here ever removed these seats and if so whats the secret. Fountain also said if you can't locate the screws just put a flat bar the under the seat and more or less pry the seat screws and whatever else comes with it out. Any suggestions appreciated.
I would not suggest prying, my screws are about 2 inches long
#3
Thread Starter
Registered
Joined: Dec 2004
Posts: 179
Likes: 2
From: Gloucester, N.J.
Thanks for the input, i looked for those screw holes in the fabric but could not find them. Found one hole one each side but did not lead to a screw that i could see. My self and two friends looked and could not find anything. I think that i will just cut the fabric all the way across the seam and see what happens.



