No Power too trim pump
 

My power trim pump is not working I have no power too main wire that goes too the solenoid any ideas?

Have you checked the breakers under the rear seat?

I am trying too find replacements for them they are very rusty and had some kind of rubber coating on them

It's a generic breaker, you can find them at west marine. You may try to bypass the breaker to see if it fixes your issue.

I've had the same issue with the breaker. But all i had to do is reset. For some reason the only time it happens is when it sits up for the winter???? Hit the breaker and its fixed...

Good point, might be easier than my suggestion :)

How do you reset them? Mine did the same after sitting all winter have already replaced solenoids guess new stuff dont hurt lol

Hit the breaker with some wd40 and push the button in. May be red or black, may slide in.

There are no buttons on these may have rusted off lol think I will just replace them thanks for the help just another hurdle with this project

make sure your fluid resivoir is topped off. Mine tripped when it got low.