Joined the 35 fountain club
04-20-2014 | 08:05 PM
#23
Thread Starter
Registered
Joined: Oct 2004
Posts: 72
Likes: 0
From: lake st.clair
finished my windshield had it powder coated black. It was alot of work had to make two extension pieces for the back of the top rails the pieces were on compound angles, when you cut the side pieces the angles change also had to machine then too. Welded them up and blended the weld in then was going to send it out for powder coat and all the snap for the tarp were all seized in had to drill them all out and weld all the holes in and blend all those but it was all worth it look awsome.Also had to shorten the two grab handles. Im going to put in all the plexi this week.
[ATTACH=CONFIG]522335[/ATTACH][ATTACH=CONFIG]522336[/ATTACH][ATTACH=CONFIG]522337[/ATTACH][ATTACH=CONFIG]522338[/ATTACH][ATTACH=CONFIG]522339[/ATTACH]
[ATTACH=CONFIG]522335[/ATTACH][ATTACH=CONFIG]522336[/ATTACH][ATTACH=CONFIG]522337[/ATTACH][ATTACH=CONFIG]522338[/ATTACH][ATTACH=CONFIG]522339[/ATTACH]
Last edited by kevinz99; 04-20-2014 at 08:09 PM.
