New 500 EFIs being built by Potter Performance
#308
Registered
Thread Starter
iTrader: (1)
Join Date: Aug 2012
Location: Sarasota FL
Posts: 635
Likes: 0
Received 0 Likes
on
0 Posts
Now lets get down to business and finish this thread out in orderly fashion. I stopped by today and spoke to the guys and it sounds like we are going to sea trial tomorrow. Ron had the beauty rings on the out side of the tails. They look great. Man oh man this guy has such a eye for detail. Its almost unreal. I'm going to post some pictures of the tails on the outside. Pay attention to the angle of the tails in conjunction with the lines in the swim platform. This I have to tell you is just one of the many things the guys at Potter do without saying a word about. I would have never said a word about the tails being up under the hallow of the swim platform. Ron did this all on his own. He measured and ordered the tails after the manifolds were installed just to get the right angle so the tails clear the platform. If you go back threw all the threads about the 32" Fever all of us complain about the same vibration of the exhaust being under the swim platform this way. Ron saw it and did something about it before I even understood what he was doing. Bravo Ron Potter. I told him face to face on another issue we had you just cant hide the experience this guy has. On to some pictures.