93-35Lightning cabin seating removal
#1
Registered
Thread Starter
93-35Lightning cabin seating removal
Want to remove cabin seating in my 93 Lightning, there are 3 sections one just lifts out and the other 2 larger section are screwed in somehow. My question is where are the screws. I looked between the cushion seam and could find none, called Fountain months ago and was told if I cannot find the screws pry the seating out with a crowbar. Not an option that I want to get into. Thanks for any assistance.
#2
Registered
Want to remove cabin seating in my 93 Lightning, there are 3 sections one just lifts out and the other 2 larger section are screwed in somehow. My question is where are the screws. I looked between the cushion seam and could find none, called Fountain months ago and was told if I cannot find the screws pry the seating out with a crowbar. Not an option that I want to get into. Thanks for any assistance.
My 1990 had 3 stainless screws between the bottom cushion to hold it down and some brackets behind the back cushion to hold it in that were under the filler panel .
#3
Spread the seams apart as much as possible and look for holes in material and poke a phillips in there. You won't see screw heads. The screws will cut thru the material.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
#5
Great, but you didn't need to slice the hole open anymore. Just stick a phillips screwdriver into the hole and it'll locate into the screw head and just unscrew the screw back up thru the hole. Either way, you got it done
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.