Wasn't boat less long.
08-06-2014 | 01:30 PM
#55
Thread Starter
Registered
Joined: Jun 2010
Posts: 196
Likes: 0
From: Omaha, NE, LOTO
So far I have tried a set of 32 Lab max's, they were a little too big. I could turn those to 4900. I threw a blade off of my 32 bravo's. Now I have a set of Herring 31 6 blades to try out, but I haven't made it to the lake yet. For everyone's information the sportmasters that are on it are standard length.
08-06-2014 | 09:33 PM
#58
Registered
Joined: Nov 2005
Posts: 635
Likes: 2
From: cincinnati ohio
You may be over triming , 3.5 is about max on the boats with high X Check the performance report for your boat. 30 maxs trim to 3.5 should bring the slip down MERCURY has a special part # for maxs to work on Fountains
Last edited by racinfever; 08-06-2014 at 09:42 PM.
08-14-2014 | 10:16 PM
#60
Thread Starter
Registered
Joined: Jun 2010
Posts: 196
Likes: 0
From: Omaha, NE, LOTO
Tried a set of 31 throttle up 6 blades. They worked better. Got me to 78 @ 4800. Then I tried som 30 throttle up 6 blades. They worked even better 82@ 5000. Getting closer.
I also got the performance report from fountain. It said it had 32 Maximus props, the x dimension is 22 1/2, and WOT was 90 @ 5350. It had no mention of the magic water they were running on though.
I also got the performance report from fountain. It said it had 32 Maximus props, the x dimension is 22 1/2, and WOT was 90 @ 5350. It had no mention of the magic water they were running on though.
