Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Fountain (https://www.offshoreonly.com/forums/fountain-37/)
-   -   35 ex theoretically (https://www.offshoreonly.com/forums/fountain/330931-35-ex-theoretically.html)

315duramax 09-20-2015 03:30 PM

35 ex theoretically
 
got myself a 04 ex to do some funky things to. going to pick it up in the next week or so. its a bare hull so im going to go nuts on it.

now, theoretically,

has anyone EVER staggered one?

has anyone put arnesons on a single step 35? if so how did it work?

are there any single step 35's with 3's 4's or 5's?

how much power is too much power for this hull?

i know side by side 525efi bravo will run deep into the 90's...


ill be posting photos of the build once i decide what to do. going to be the advertisment boat for 2017

cheers:ernaehrung004:

dandercam1 09-21-2015 03:35 PM

Im interested if there are any other 35's with #5 drives out there? Seems like a rare setup.

Wildman_grafix 09-21-2015 07:03 PM


Originally Posted by dandercam1 (Post 4357197)
Im interested if there are any other 35's with #5 drives out there? Seems like a rare setup.

I seen one for sell about a year ago with no power. Swim platform was cut so you could trim the drives.

phragle 09-21-2015 07:49 PM

Its fiberglass, staggering it would be simple, nothing a sawzall cant fix, move some stringers and bulkheads...What you really need to figure out is what the stagger is going to do the CG on a single step.,,,35' is definitely long enough to stagger though. You plan on keeping the cabin? If you can shed that and watch the weight on the new stringer/floor setup you could theoretically shed a bunch of pounds and maintain the same CG..

jmoore1225 09-21-2015 07:55 PM

Please Phragle don't feed the bull****.....

IndyRacer 09-21-2015 10:10 PM


Originally Posted by dandercam1 (Post 4357197)
Im interested if there are any other 35's with #5 drives out there? Seems like a rare setup.

How fast is your 92/35? How much HP? Props? Any info much appreciated, research for consideration on my 92/35 factory stock 410hp per side B1 3blade 25p light fuel 72-73mph.
Thanks

315duramax 09-22-2015 09:48 AM


Originally Posted by phragle (Post 4357304)
Its fiberglass, staggering it would be simple, nothing a sawzall cant fix, move some stringers and bulkheads...What you really need to figure out is what the stagger is going to do the CG on a single step.,,,35' is definitely long enough to stagger though. You plan on keeping the cabin? If you can shed that and watch the weight on the new stringer/floor setup you could theoretically shed a bunch of pounds and maintain the same CG..

stagger is another theoretically. right now im not sure about it. it seems like i will need to cut the rear bulkhead out and move forward. right now im just going to focus on the cockpit and windshield. this will be my boat for 2017 so im not going to dry and blast this out or rush it. in theory id like to keep the cabin because its all there in great shape. but im not sure how well that will work with an acura car style dash. something i will decide once im tearing into it.

315duramax 09-22-2015 09:49 AM


Originally Posted by jmoore1225 (Post 4357313)
Please Phragle don't feed the bull****.....

what bull****? you think im just hoping and dreaming and wanting to build a boat? maybe ill throw some 330's and alphas on the boat and make her rip!

jmoore1225 09-22-2015 01:17 PM

Everything you ever claimed so far has been a pipe dream..... Stop talking so much & just do it!

315duramax 09-22-2015 04:14 PM

Pipe dream... Ok... Lol


All times are GMT -5. The time now is 11:13 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.