cant find chrome FOUNTAIN logo
12-08-2015 | 06:33 PM
#21
Registered
Joined: Oct 2008
Posts: 337
Likes: 2
From: Central New York
If you figure out how to get them off in one piece I'll buy them but you are probably right they aren't going anywhere lol. 
Breaking them would sure be a mess and you better be good at yoga to get all the little pieces out of these bilges. I can't imagine what the boating version of having 7 years of bad luck would be lol!
Breaking them would sure be a mess and you better be good at yoga to get all the little pieces out of these bilges. I can't imagine what the boating version of having 7 years of bad luck would be lol!Oh good god, I never thought about the bad luck... Probably shouldn't even bother then!
12-08-2015 | 06:53 PM
#23
Registered
Joined: Sep 2014
Posts: 870
Likes: 259
From: Portland, OR
Yes it's horrible... and to add to it I also have a "engine overhaul thread" you can read about lol. Coincidently one engine is in pieces in my garage now. I think I have found somewhere to take it to for the hull repairs which really need done first so right now we are just saving up for everything...
12-09-2015 | 05:49 PM
#24
Registered
Joined: Oct 2008
Posts: 337
Likes: 2
From: Central New York
I'm sorry to hear that. We are planning a top end refresh next fall on both motors. I've been talking to a few builders for a couple months now and feel very confident with one guy. Hopefully you'll be back on the water next year without breaking the bank.
08-03-2016 | 12:29 AM
#25
Thread Starter
Registered
Joined: Mar 2006
Posts: 61
Likes: 1
From: Lake Stevens ,WA.
Hey DAVE do you still have the plastic logo that you mentioned you bought from Great Lakes skipper , that is the one I need and I called and they said they had just sold the last one last June 2015 . I can't find one anywhere and I really need one to make my boat complete , it's missing the bolt on the right side , let me know if you want to sell it , thanks Brett
08-13-2016 | 06:59 PM
#26
Registered
Joined: Sep 2014
Posts: 870
Likes: 259
From: Portland, OR
Hey DAVE do you still have the plastic logo that you mentioned you bought from Great Lakes skipper , that is the one I need and I called and they said they had just sold the last one last June 2015 . I can't find one anywhere and I really need one to make my boat complete , it's missing the bolt on the right side , let me know if you want to sell it , thanks Brett
07-12-2017 | 11:17 AM
#27
Registered
Joined: Sep 2010
Posts: 8
Likes: 0
From: Grand Rapids, MI
Mine are about 5.5" in dia.
I called fountain and the only ones they sell now are 4.5", comes with the letters, and are $215 per side. - outch!
Thanks in advance. Jon
08-13-2017 | 08:39 PM
#29
Registered
Joined: Sep 2010
Posts: 8
Likes: 0
From: Grand Rapids, MI
I have some Fountain Emblems available! 5-1/2" outside dia.
Couldn't find any replacement emblems for my 27 fever. The ones offered by Fountain Powerboats are only 4.5" dia and cost $220 per side, and comes with the full Fountain word letters.
Had some made out of 11ga Stainless Steel.
Used 3M 2-way tape that I got from a body shop - same tape they use to hold car molding in place.
Will attempt to add a picture.
I have 8 emblems left at the moment. selling for $50 each.
Ship from Grand Rapids, MI.
PM me if you are interested. I'm typically online during the week.
Thanks.
Couldn't find any replacement emblems for my 27 fever. The ones offered by Fountain Powerboats are only 4.5" dia and cost $220 per side, and comes with the full Fountain word letters.
Had some made out of 11ga Stainless Steel.
Used 3M 2-way tape that I got from a body shop - same tape they use to hold car molding in place.
Will attempt to add a picture.
I have 8 emblems left at the moment. selling for $50 each.
Ship from Grand Rapids, MI.
PM me if you are interested. I'm typically online during the week.
Thanks.
Last edited by skidoomaster; 08-13-2017 at 08:42 PM.
