29 Fever with twin 540 EFI
08-16-2016, 07:45 PM
#1
Registered
Thread Starter
Join Date: Aug 2016
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
29 Fever with twin 540 EFI
hey guys new to the forum, i have kept it fairly simple in the fountain world with a few 27 single small blocks but recently stepped up to a 98 fever with twin 540CI EFI motors, XZ Drives, -2 Sportmaster Lowers, to say the least its a handful to drive but learning as i go
questions....
any prop suggestions or others running big block 29s?
advice on finding the sweet spot as far as chine etc?
current set up 32 Bravos spinning in, props need to be replaced both have very rough edges and nicks, spinning 4950 RPM at 4.5 on trim with tabs at the stops at 4 got me 91.4 MPH
thanks guys!
questions....
any prop suggestions or others running big block 29s?
advice on finding the sweet spot as far as chine etc?
current set up 32 Bravos spinning in, props need to be replaced both have very rough edges and nicks, spinning 4950 RPM at 4.5 on trim with tabs at the stops at 4 got me 91.4 MPH
thanks guys!
11-18-2016, 08:41 PM
#2
Registered
Join Date: Aug 2013
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Just came across this post while doing some googling. I have a 01 29 that I am currently putting 540's in. It has bravo 1's on it and I have no idea where to start with my props. Do you still like the 32 bravos?
