Looking for a project
#1
Thread Starter
Registered
Joined: May 2011
Posts: 165
Likes: 1
From: Rochester, NY
Hi all. I've decided to get back to the market after ten years. I miss my old 10 meter. I redid that boat, the tread is around here somewhere under bryanspeedracer...
I'm looking for a project, interior, needs power, soft transom, etc prefer twins have 15k or so.
Thanks!
Bryan
I'm looking for a project, interior, needs power, soft transom, etc prefer twins have 15k or so.
Thanks!
Bryan
#6
Registered
Joined: Aug 2013
Posts: 783
Likes: 0
From: Madison, Ms
Sorry I just finished with mine and I would not have considered it a project boat, just trying to clean up and upgrade, I was ready to sux on a .38 toward the end and almost considered selling it.
#7
Thread Starter
Registered
Joined: May 2011
Posts: 165
Likes: 1
From: Rochester, NY
I can relate although I do enjoy working on them.
I can't do a bare hull. I don't want the project to go on for years. Ideally, I'd like something in the early '90s that is otherwise complete but needs works. There has to be something positive to start with other than the idea of owning a boat
Thanks to all that have responded
I can't do a bare hull. I don't want the project to go on for years. Ideally, I'd like something in the early '90s that is otherwise complete but needs works. There has to be something positive to start with other than the idea of owning a boat
Thanks to all that have responded




